TP-Link Deco XE75 Pro

Model details

Additional useful information

This guide identifies TP-Link Deco XE75 Pro as Deco XE75 Pro AXE5400 Wi-Fi 6E unit; its 2.5GbE interface distinguishes it from standard XE75. It documents Wi-Fi 6E, AXE5400 class, One auto-sensing 2.5GbE WAN/LAN port plus two auto-sensing 1GbE WAN/LAN ports per unit. Use the linked manufacturer instructions for initial setup, recovery and model-specific compatibility before adding nodes, cabling or replacement power hardware.

This page covers TP-Link Deco XE75 Pro exactly: Deco XE75 Pro AXE5400 Wi-Fi 6E unit; its 2.5GbE interface distinguishes it from standard XE75. Wi-Fi 6E, AXE5400 class simultaneous 2.4GHz, 5GHz and 6GHz bands; 2x2 radios with published rates of 574Mbps, 2402Mbps and 2402Mbps and 160MHz support on allowed channels. One auto-sensing 2.5GbE WAN/LAN port plus two auto-sensing 1GbE WAN/LAN ports per unit. Use the supplied external adapter and match the exact XE75 Pro hardware-version label; TP-Link lists multiple U.S. revision branches.

Onboard and manage the system in the TP-Link Deco mobile app with a TP-Link ID. connect one unit to the modem or upstream gateway, wait for its setup LED state and complete the guided flow in the Deco app before adding satellites. Each unit can lead a Deco network in router mode or operate as an access point/satellite; any auto-sensing port may become WAN on the main unit. TP-Link states that Deco models can share one mesh; features depend on the main Deco, while radio, port and hardware-version limits remain model-specific. TP-Link permits mixed Deco networks, but it recommends using the most capable unit as the main Deco and placing nodes so that wireless or Ethernet backhaul matches the available hardware.

If a unit cannot join or drops offline, verify modem service, the selected main unit, WAN cabling and the app-reported LED state, then reboot before resetting; add a satellite in the app before wiring Ethernet backhaul. TP-Link's Deco reset guidance uses the app's Remove action or a one-second press of the powered unit's reset control; reset erases that unit's configuration. The U.S. download page lists several hardware revisions, and firmware must match the underside code. 6GHz/160MHz depend on region and client support. The exact-model TP-Link download page is the authority for hardware-version and regional firmware; available revisions, radio channels and services vary by market. Hardware versions and regional firmware can differ under one retail name. Read the version and power label on the underside before choosing a replacement adapter or applying a download intended for another market.

• Power: Use the supplied external adapter and match the exact XE75 Pro hardware-version label; TP-Link lists multiple U.S. revision branches.
• Management: the TP-Link Deco mobile app with a TP-Link ID
• Compatibility: TP-Link states that Deco models can share one mesh; features depend on the main Deco, while radio, port and hardware-version limits remain model-specific.
• Setup: connect one unit to the modem or upstream gateway, wait for its setup LED state and complete the guided flow in the Deco app before adding satellites.
• Reset and recovery: TP-Link's Deco reset guidance uses the app's Remove action or a one-second press of the powered unit's reset control; reset erases that unit's configuration.
• Region and lifecycle: The U.S. download page lists several hardware revisions, and firmware must match the underside code. 6GHz/160MHz depend on region and client support.