SwitchBot Hub 2 Smart-Home Bridge

Model details

Additional useful information

Use this Scanual guide to identify SwitchBot Hub 2 Smart-Home Bridge, follow official setup and reset guidance, and match power, radio, mounting, hub, and regional accessories to model Hub 2.

SwitchBot Hub 2 is a 2.4GHz Wi-Fi and Bluetooth bridge with infrared control, temperature and humidity sensing, display buttons, and Matter bridging for selected SwitchBot devices.

Setup: Use the supplied sensor cable with a 5V 2A source, add Hub 2 on 2.4GHz Wi-Fi, calibrate sensors if needed, learn IR devices, then commission its Matter bridge into a separate controller.

Reset: Hold the On and Off controls for roughly fifteen seconds as documented. Understand which network and display settings are cleared; learned remotes and scenes may remain and can require separate deletion.

Troubleshooting: For bad temperature readings, verify the original sensor cable and airflow. For IR, check line of sight. For Matter, confirm the selected child is on SwitchBot's bridge list and the controller is online.

Compatibility and ecosystem boundary: Hub 2 bridges only supported SwitchBot Bluetooth children to Matter and is not a Thread border router. Its sensor cable is function-bearing, so a generic USB-C lead loses temperature and humidity measurement.

Maintenance and accessory matching: Keep the sensor section away from heat sources, retain IR line of sight, and use 5V 2A power. Mounts must leave buttons, display, light sensor, and cable exposed.

Published checkpoints: Product: SwitchBot Hub 2. Network: 2.4GHz Wi-Fi only. Bluetooth: bridge for supported nearby SwitchBot products. Infrared: learning and cloud control for supported IR appliances. Sensors: temperature and humidity sensor is located in the supplied cable. Controls: display with two configurable scene buttons and light sensor. Power: 5V 2A through USB-C using the supplied sensor cable. Matter: bridges a published subset of SwitchBot devices. Thread boundary: Hub 2 is not presented as a Thread border router. Matter requirement: separate Apple, Google, Alexa, SmartThings, or other Matter controller. Setup: SwitchBot app, 2.4GHz network, then Matter QR/code if used. Reset: hold On and Off buttons about 15 seconds for published reset behavior. Reset limit: reset can clear Wi-Fi/indicators without necessarily erasing learned remotes and scenes.

• Controls: display with two configurable scene buttons and light sensor
• Power: 5V 2A through USB-C using the supplied sensor cable
• Matter: bridges a published subset of SwitchBot devices
• Thread boundary: Hub 2 is not presented as a Thread border router
• Matter requirement: separate Apple, Google, Alexa, SmartThings, or other Matter controller
• Setup: SwitchBot app, 2.4GHz network, then Matter QR/code if used
• Reset: hold On and Off buttons about 15 seconds for published reset behavior
• Reset limit: reset can clear Wi-Fi/indicators without necessarily erasing learned remotes and scenes