Philips Hue Bridge Pro
Exact model Bridge Pro
Also identified as: Hue Bridge Pro, Philips Hue 046677582111, 929003582615
Philips Hue Bridge Pro is the black higher-capacity Zigbee hub for 150 lights, 50 accessories, 500 scenes, Ethernet or Wi-Fi networking, MotionAware, and bridge-based Matter.
- Product number
- 046677582111; material number 929003582615
- Capacity
- up to 150 lights and 50 accessories
- Scenes
- up to 500 saved scenes
- Lighting radio
- Zigbee with Zigbee Trust Center
- Network
- Ethernet recommended; Wi-Fi is also supported
First time using a Scanual? Read the quick guide.
Information checked August 27, 2026. Confirm critical specifications with the manufacturer.
Official resources
Manuals and official support
Replacement parts and accessories
Products for Philips Hue Bridge Pro
Confirm your exact model number, the current product listing, included parts, and return terms before ordering.
Cables & connections
Ethernet Cable
Cmple Cat 6 Ethernet Patch Cable, 5 ft
The official Bridge Pro resources document a standard RJ45 Ethernet port. This five-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Amazon Basics RJ45 Cat 6 Ethernet Patch Cable, 15 ft
The official Bridge Pro resources identify an RJ45 Ethernet port. This 15-foot Cat6 patch cable has standard RJ45 connectors, so it can make a short indoor connection to a router or switch. Actual link rate is limited by both ports, the complete cable run, and the installation; this listing alone is not evidence of 5 or 10 Gb/s operation. Use separately rated Cat6A, permanent-run, outdoor, UV-resistant, direct-burial, or PoE cabling wherever the device or site requires it.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Jadaol Cat 6 Ethernet Patch Cable, 25 ft
The official Bridge Pro resources document a standard RJ45 Ethernet port. This 25-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueModel details
Additional useful information
Use this Scanual guide to identify Philips Hue Hue Bridge Pro, follow official setup and reset guidance, and match power, radio, mounting, hub, and regional accessories to model Bridge Pro.
Philips Hue Bridge Pro is the black higher-capacity Zigbee hub for 150 lights, 50 accessories, 500 scenes, Ethernet or Wi-Fi networking, MotionAware, and bridge-based Matter.
Setup: Connect 5V 1A power and preferably Ethernet, add Bridge Pro in Hue, update firmware, then use the official migration flow before retiring an existing BSB002 bridge.
Reset: A factory reset clears rooms, scenes, device assignments, integrations, and bridge ownership. Try app migration and network recovery first, and document the old bridge before using the recessed control.
Troubleshooting: Check power, Ethernet or Wi-Fi reach, DHCP, app local-network permission, and update state. MotionAware failures also require compatible light placement and calibration rather than a bridge reset.
Compatibility and ecosystem boundary: Bridge Pro remains a Hue Zigbee hub and presents supported resources through Matter; it is not a generic Thread border router. Its 150-light and 50-accessory capacity exceeds BSB002 but does not imply universal Zigbee support.
Maintenance and accessory matching: Use the exact 5V 1A adapter and Pro mount, operate indoors within published temperature and humidity, and keep network and power connections serviceable during migration.
Published checkpoints: Product number: 046677582111; material number 929003582615. Capacity: up to 150 lights and 50 accessories. Scenes: up to 500 saved scenes. Lighting radio: Zigbee with Zigbee Trust Center. Network: Ethernet recommended; Wi-Fi is also supported. Power adapter: 100-240VAC input, 5V DC 1A output. Hub power: 5W published maximum and 0.1W maximum standby. Ingress: IP20 indoor equipment. Operating environment: 0C to 40C and non-condensing humidity. Matter: supported via Hue Bridge software. MotionAware: compatible Hue lights can participate in motion sensing under feature conditions. Migration: Hue app provides a V2-to-Pro migration path; reset should follow backup/migration review.
- Power adapter: 100-240VAC input, 5V DC 1A output
- Hub power: 5W published maximum and 0.1W maximum standby
- Ingress: IP20 indoor equipment
- Operating environment: 0C to 40C and non-condensing humidity
- Matter: supported via Hue Bridge software
- MotionAware: compatible Hue lights can participate in motion sensing under feature conditions
- Migration: Hue app provides a V2-to-Pro migration path; reset should follow backup/migration review
See something wrong? Report an error
Report a broken official link, a seller-listed item that does not match, or another factual issue. Scanual reviews requests but does not provide urgent or manufacturer support.