NETGEAR Orbi Dual-band WiFi 6 System RBK353

Model details

Additional useful information

This guide identifies NETGEAR Orbi Dual-band WiFi 6 System RBK353 as RBK353 kit: one RBR350 router plus two RBS350 satellites; it differs from RBK352 only in included satellite count. It documents Wi-Fi 6, AX1800 class, RBR350: one 1GbE Internet plus three 1GbE LAN ports; each RBS350: two 1GbE LAN ports. Use the linked manufacturer instructions for initial setup, recovery and model-specific compatibility before adding nodes, cabling or replacement power hardware.

This page covers NETGEAR Orbi Dual-band WiFi 6 System RBK353 exactly: RBK353 kit: one RBR350 router plus two RBS350 satellites; it differs from RBK352 only in included satellite count. Wi-Fi 6, AX1800 class simultaneous 2.4GHz and 5GHz bands; dual-band radios share spectrum between clients and wireless backhaul. RBR350: one 1GbE Internet plus three 1GbE LAN ports; each RBS350: two 1GbE LAN ports. Use the included adapters and verify voltage, current, polarity, connector and regional approval on each RBR350/RBS350 label before replacement.

Configure the system with the Orbi app and Orbi web interface. connect the kit's router component to the modem or upstream gateway and follow the Orbi or Nighthawk app flow for that family, then synchronize the included satellites. RBR350 is the router and two RBS350 units are satellites. Use only Orbi 350-family satellite combinations named in NETGEAR's compatibility matrix. NETGEAR kit numbers encode a specific router and satellite count, so use the component identities here when adding a satellite or replacing a unit; a nearby RBK, MK or CBK number can describe different radios and ports.

If the Internet link or a satellite fails, check modem/SIM/coax service as applicable, WAN cabling, adapter labels and satellite sync LEDs, then restart components in topology order before resetting. Press the recessed reset control until the documented LED state appears; factory reset removes the component from the system and requires setup/synchronization again. Adapter SKUs, channel availability and pack contents vary by region; do not use the kit number alone to match an electrical part. NETGEAR's support page still provides downloads and documentation as of the review date; subscriptions, sale status and warranty vary by region. Update router and satellite firmware as a matched system before diagnosing backhaul. For replacement power or networking parts, confirm the label voltage/current and port speed on the exact component, not only the kit number.

• Power: Use the included adapters and verify voltage, current, polarity, connector and regional approval on each RBR350/RBS350 label before replacement.
• Management: the Orbi app and Orbi web interface
• Compatibility: Use only Orbi 350-family satellite combinations named in NETGEAR's compatibility matrix.
• Setup: connect the kit's router component to the modem or upstream gateway and follow the Orbi or Nighthawk app flow for that family, then synchronize the included satellites.
• Reset and recovery: Press the recessed reset control until the documented LED state appears; factory reset removes the component from the system and requires setup/synchronization again.
• Region and lifecycle: Adapter SKUs, channel availability and pack contents vary by region; do not use the kit number alone to match an electrical part.