NETGEAR Nighthawk Mesh WiFi 6 System MK63
Exact model MK63
Also identified as: MK63, MR60 + 2 MS60, Nighthawk Mesh WiFi 6
MK63 is a three-unit dual-band AX1500 Wi-Fi 6 kit containing one MR60 router and two MS60 satellites.
- Exact identity
- MK63 kit: one MR60 router plus two MS60 satellites
- Wi-Fi generation
- Wi-Fi 6, AX1500 class
- Bands and radios
- simultaneous 2.4GHz and 5GHz bands; dual-band radios shared by client traffic and wireless mesh backhaul.
- Network role
- MR60 is the router; two MS60 units are mesh satellites.
- Ethernet and wired interfaces
- MR60: one 1GbE Internet port and one 1GbE LAN port; each MS60: one 1GbE LAN port.
First time using a Scanual? Read the quick guide.
Information checked August 27, 2026. Confirm critical specifications with the manufacturer.
Official resources
Manuals and official support
Replacement parts and accessories
Products for NETGEAR MK63
Confirm your exact model number, the current product listing, included parts, and return terms before ordering.
Cables & connections
Ethernet Cable
Cmple Cat 6 Ethernet Patch Cable, 5 ft
The official MK63 resources document a standard RJ45 Ethernet port. This five-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Amazon Basics RJ45 Cat 6 Ethernet Patch Cable, 15 ft
The official MK63 resources identify an RJ45 Ethernet port. This 15-foot Cat6 patch cable has standard RJ45 connectors, so it can make a short indoor connection to a router or switch. Actual link rate is limited by both ports, the complete cable run, and the installation; this listing alone is not evidence of 5 or 10 Gb/s operation. Use separately rated Cat6A, permanent-run, outdoor, UV-resistant, direct-burial, or PoE cabling wherever the device or site requires it.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Jadaol Cat 6 Ethernet Patch Cable, 25 ft
The official MK63 resources document a standard RJ45 Ethernet port. This 25-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueModel details
Additional useful information
This guide identifies NETGEAR Nighthawk Mesh WiFi 6 System MK63 as MK63 kit: one MR60 router plus two MS60 satellites. It documents Wi-Fi 6, AX1500 class, MR60: one 1GbE Internet port and one 1GbE LAN port; each MS60: one 1GbE LAN port. Use the linked manufacturer instructions for initial setup, recovery and model-specific compatibility before adding nodes, cabling or replacement power hardware.
This page covers NETGEAR Nighthawk Mesh WiFi 6 System MK63 exactly: MK63 kit: one MR60 router plus two MS60 satellites. Wi-Fi 6, AX1500 class simultaneous 2.4GHz and 5GHz bands; dual-band radios shared by client traffic and wireless mesh backhaul. MR60: one 1GbE Internet port and one 1GbE LAN port; each MS60: one 1GbE LAN port. 12V DC, 1.5A per MR60/MS60 unit.
Configure the system with the Nighthawk app and supported web interface. connect the kit's router component to the modem or upstream gateway and follow the Orbi or Nighthawk app flow for that family, then synchronize the included satellites. MR60 is the router; two MS60 units are mesh satellites. Expand only with the exact Nighthawk Mesh/EasyMesh combinations documented for MR60/MS60; Orbi satellites are a different family. NETGEAR kit numbers encode a specific router and satellite count, so use the component identities here when adding a satellite or replacing a unit; a nearby RBK, MK or CBK number can describe different radios and ports.
If the Internet link or a satellite fails, check modem/SIM/coax service as applicable, WAN cabling, adapter labels and satellite sync LEDs, then restart components in topology order before resetting. Press the recessed reset control until the documented LED state appears; factory reset removes the component from the system and requires setup/synchronization again. Pack suffixes, security subscription and regional firmware vary; MK63 is not an Orbi RBK kit. NETGEAR's support page still provides downloads and documentation as of the review date; subscriptions, sale status and warranty vary by region. Update router and satellite firmware as a matched system before diagnosing backhaul. For replacement power or networking parts, confirm the label voltage/current and port speed on the exact component, not only the kit number.
- Power: 12V DC, 1.5A per MR60/MS60 unit.
- Management: the Nighthawk app and supported web interface
- Compatibility: Expand only with the exact Nighthawk Mesh/EasyMesh combinations documented for MR60/MS60; Orbi satellites are a different family.
- Setup: connect the kit's router component to the modem or upstream gateway and follow the Orbi or Nighthawk app flow for that family, then synchronize the included satellites.
- Reset and recovery: Press the recessed reset control until the documented LED state appears; factory reset removes the component from the system and requires setup/synchronization again.
- Region and lifecycle: Pack suffixes, security subscription and regional firmware vary; MK63 is not an Orbi RBK kit.
See something wrong? Report an error
Report a broken official link, a seller-listed item that does not match, or another factual issue. Scanual reviews requests but does not provide urgent or manufacturer support.