Hubitat Elevation Model C-8 Pro Smart-Home Hub
Exact model C-8 Pro
Also identified as: Hubitat Elevation C-8 Pro, C8 Pro, Hubitat C-8 Pro US
Hubitat Elevation C-8 Pro is the US local-automation hub with external-antenna Zigbee 3.0 and 908.4MHz Z-Wave 800/LR, plus Ethernet, Wi-Fi, Bluetooth, and Matter control.
- Exact model
- Hubitat Elevation C-8 Pro US version
- Zigbee
- built-in Zigbee 3.0 with external antenna
- Z-Wave
- 800-series Z-Wave Long Range at US 908.4MHz with external antenna
- Network
- Ethernet and built-in Wi-Fi
- Bluetooth
- supported on current platform software
First time using a Scanual? Read the quick guide.
Information checked August 27, 2026. Confirm critical specifications with the manufacturer.
Official resources
Manuals and official support
Replacement parts and accessories
Products for Hubitat C-8 Pro
Confirm your exact model number, the current product listing, included parts, and return terms before ordering.
Cables & connections
Ethernet Cable
Cmple Cat 6 Ethernet Patch Cable, 5 ft
The official C-8 Pro resources document a standard RJ45 Ethernet port. This five-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Amazon Basics RJ45 Cat 6 Ethernet Patch Cable, 15 ft
The official C-8 Pro resources identify an RJ45 Ethernet port. This 15-foot Cat6 patch cable has standard RJ45 connectors, so it can make a short indoor connection to a router or switch. Actual link rate is limited by both ports, the complete cable run, and the installation; this listing alone is not evidence of 5 or 10 Gb/s operation. Use separately rated Cat6A, permanent-run, outdoor, UV-resistant, direct-burial, or PoE cabling wherever the device or site requires it.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Jadaol Cat 6 Ethernet Patch Cable, 25 ft
The official C-8 Pro resources document a standard RJ45 Ethernet port. This 25-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueModel details
Additional useful information
Use this Scanual guide to identify Hubitat Elevation Model C-8 Pro Smart-Home Hub, follow official setup and reset guidance, and match power, radio, mounting, hub, and regional accessories to model C-8 Pro.
Hubitat Elevation C-8 Pro is the US local-automation hub with external-antenna Zigbee 3.0 and 908.4MHz Z-Wave 800/LR, plus Ethernet, Wi-Fi, Bluetooth, and Matter control.
Setup: Attach the labeled Zigbee and Z-Wave antennas to their correct ports, connect Ethernet and the supplied power adapter, discover the hub locally, update platform firmware, and create a backup before joining devices.
Reset: Use the Diagnostic Tool's Soft Reset and restore workflow for database recovery. A full hub or radio reset has different consequences and should follow an exported backup and device-migration plan.
Troubleshooting: Separate LAN access, Zigbee, Z-Wave, Matter, and app problems. Verify antenna placement, regional Z-Wave inclusion or exclusion, compatible drivers, and a Thread border router before deleting healthy radio data.
Compatibility and ecosystem boundary: The US unit's 908.4MHz Z-Wave radio cannot be used for EU or AU devices. C-8 Pro is a Matter controller but not itself the required Thread border router for Thread endpoints.
Maintenance and accessory matching: Keep antennas matched and upright, use stable low-voltage power, update backups before platform changes, and consult Hubitat's supported-device list instead of assuming every Zigbee or Z-Wave product has a driver.
Published checkpoints: Exact model: Hubitat Elevation C-8 Pro US version. Zigbee: built-in Zigbee 3.0 with external antenna. Z-Wave: 800-series Z-Wave Long Range at US 908.4MHz with external antenna. Network: Ethernet and built-in Wi-Fi. Bluetooth: supported on current platform software. Matter: controller support on current hub firmware. Thread boundary: Matter-over-Thread devices require a separate compatible Thread border router. Processing: automations and drivers can run locally. Power: supplied US 120V adapter feeds the hub's low-voltage USB-C input. Region: the cited unit is sold for the mainland 48 US states. Setup: discover the hub on the LAN and register through Hubitat's setup interface. Reset: Soft Reset preserves radio databases when restored correctly; Full Reset and radio resets are separate destructive actions.
- Matter: controller support on current hub firmware
- Thread boundary: Matter-over-Thread devices require a separate compatible Thread border router
- Processing: automations and drivers can run locally
- Power: supplied US 120V adapter feeds the hub's low-voltage USB-C input
- Region: the cited unit is sold for the mainland 48 US states
- Setup: discover the hub on the LAN and register through Hubitat's setup interface
- Reset: Soft Reset preserves radio databases when restored correctly; Full Reset and radio resets are separate destructive actions
See something wrong? Report an error
Report a broken official link, a seller-listed item that does not match, or another factual issue. Scanual reviews requests but does not provide urgent or manufacturer support.