Home Assistant Green Smart-Home Hub
Exact model Green
Also identified as: Home Assistant Green, HA Green, NC-GREEN-1176
Home Assistant Green is a preinstalled local automation appliance with Ethernet, 4GB RAM, 32GB eMMC, USB expansion, and no built-in Wi-Fi or smart-home radio.
- Product
- Home Assistant Green
- Software
- Home Assistant Operating System preinstalled
- Processor
- Rockchip RK3566 quad-core Arm Cortex-A55 at up to 1.8GHz
- Memory
- 4GB LPDDR4X
- Storage
- 32GB eMMC
First time using a Scanual? Read the quick guide.
Information checked August 27, 2026. Confirm critical specifications with the manufacturer.
Official resources
Manuals and official support
Replacement parts and accessories
Products for Home Assistant Green
Confirm your exact model number, the current product listing, included parts, and return terms before ordering.
Cables & connections
Ethernet Cable
Cmple Cat 6 Ethernet Patch Cable, 5 ft
The official Green resources document a standard RJ45 Ethernet port. This five-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Amazon Basics RJ45 Cat 6 Ethernet Patch Cable, 15 ft
The official Green resources identify an RJ45 Ethernet port. This 15-foot Cat6 patch cable has standard RJ45 connectors, so it can make a short indoor connection to a router or switch. Actual link rate is limited by both ports, the complete cable run, and the installation; this listing alone is not evidence of 5 or 10 Gb/s operation. Use separately rated Cat6A, permanent-run, outdoor, UV-resistant, direct-burial, or PoE cabling wherever the device or site requires it.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Jadaol Cat 6 Ethernet Patch Cable, 25 ft
The official Green resources document a standard RJ45 Ethernet port. This 25-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueModel details
Additional useful information
Use this Scanual guide to identify Home Assistant Home Assistant Green Smart-Home Hub, follow official setup and reset guidance, and match power, radio, mounting, hub, and regional accessories to model Green.
Home Assistant Green is a preinstalled local automation appliance with Ethernet, 4GB RAM, 32GB eMMC, USB expansion, and no built-in Wi-Fi or smart-home radio.
Setup: Connect Green by Ethernet, attach the 12V center-positive supply, wait for Home Assistant OS to initialize, and complete onboarding from a browser or the mobile app before adding integrations.
Reset: The official reset/reinstall process uses recovery media and erases local storage while installing a current image. Create and download a backup before starting, then restore only after onboarding succeeds.
Troubleshooting: For no discovery, inspect power LEDs, Ethernet link, DHCP lease, DNS or mDNS, and try the assigned IP address. USB-radio issues should be isolated from the core Ethernet appliance.
Compatibility and ecosystem boundary: Green is not itself a Zigbee, Thread, Z-Wave, Bluetooth, or Wi-Fi hub until supported external radios are added. Matter-over-Thread also needs an appropriate Thread radio and integration configuration.
Maintenance and accessory matching: Use the exact 12V barrel specification, reliable Ethernet, and supported USB radios on short extension leads. Maintain off-device backups because eMMC reinstall and hardware replacement need a recoverable configuration.
Published checkpoints: Product: Home Assistant Green. Software: Home Assistant Operating System preinstalled. Processor: Rockchip RK3566 quad-core Arm Cortex-A55 at up to 1.8GHz. Memory: 4GB LPDDR4X. Storage: 32GB eMMC. Network: Gigabit Ethernet; no built-in Wi-Fi. USB: two USB 2.0 Type-A expansion ports. Display/service: HDMI output and microSD service slot are not normal desktop interfaces. Power: 12V DC at 1A through a 5.5 by 2.1mm center-positive barrel connector. Radio boundary: no built-in Zigbee, Thread, Z-Wave, or Bluetooth radio. Setup: Ethernet plus browser/mobile onboarding at homeassistant.local or discovered address. Reset: reinstall procedure downloads the current image and erases local data; backup first.
- Network: Gigabit Ethernet; no built-in Wi-Fi
- USB: two USB 2.0 Type-A expansion ports
- Display/service: HDMI output and microSD service slot are not normal desktop interfaces
- Power: 12V DC at 1A through a 5.5 by 2.1mm center-positive barrel connector
- Radio boundary: no built-in Zigbee, Thread, Z-Wave, or Bluetooth radio
- Setup: Ethernet plus browser/mobile onboarding at homeassistant.local or discovered address
- Reset: reinstall procedure downloads the current image and erases local data; backup first
See something wrong? Report an error
Report a broken official link, a seller-listed item that does not match, or another factual issue. Scanual reviews requests but does not provide urgent or manufacturer support.