eero Pro 7

Model details

Additional useful information

This guide identifies eero Pro 7 as eero Pro 7, official hardware model ME10001. It documents Wi-Fi 7, BE10800 class, Two auto-sensing 5GbE ports. Use the linked manufacturer instructions for initial setup, recovery and model-specific compatibility before adding nodes, cabling or replacement power hardware.

This page covers eero Pro 7 exactly: eero Pro 7, official hardware model ME10001. Wi-Fi 7, BE10800 class simultaneous 2.4GHz, 5GHz and 6GHz bands; 2x2 radios on each band, with Wi-Fi 7 features for supported clients. Two auto-sensing 5GbE ports. 27W USB-C external adapter accepting 100-240V AC.

Set up and administer the network with the eero mobile app; an eero account and supported mobile device are required for setup. connect a gateway unit to the modem or upstream Ethernet, then follow the eero app's Bluetooth/location-assisted setup and software update flow. It can be the gateway or a wired/wireless mesh node. It joins supported eero networks; mixed older hardware may reduce advanced features or throughput. In a mixed eero network, the least-capable placement or link can constrain features and performance even when the units are allowed to join the same network.

For loss of service, check the upstream modem, cable, app-reported LED state and power first, then restart the modem and eero in eero's documented order. A soft reset uses the reset button without deleting the network; the longer factory-reset sequence removes the unit and requires app setup again, so use eero's exact LED-timed procedure. 6GHz and Wi-Fi 7 operation depend on local regulation, firmware and clients. The cited eero support and compliance pages were live on the review date; feature availability, sale status and warranty terms remain region-specific. Match power and mounting accessories against this exact enclosure and model number. Do not substitute a visually similar eero adapter, PoE source or outdoor part unless eero's current documentation names the required electrical standard and model.

• Power: 27W USB-C external adapter accepting 100-240V AC.
• Management: the eero mobile app; an eero account and supported mobile device are required for setup
• Compatibility: It joins supported eero networks; mixed older hardware may reduce advanced features or throughput.
• Setup: connect a gateway unit to the modem or upstream Ethernet, then follow the eero app's Bluetooth/location-assisted setup and software update flow.
• Reset and recovery: A soft reset uses the reset button without deleting the network; the longer factory-reset sequence removes the unit and requires app setup again, so use eero's exact LED-timed procedure.
• Region and lifecycle: 6GHz and Wi-Fi 7 operation depend on local regulation, firmware and clients.