eero Pro 6
Exact model K010001
Also identified as: K010001, eero Pro 6, eero-k010001
eero Pro 6 model K010001 is a tri-band Wi-Fi 6 mesh unit with two auto-sensing gigabit Ethernet ports and a 4x4 upper 5GHz radio.
- Exact identity
- model K010001 eero Pro 6; the input name 'eero 6' is corrected to eero's exact Pro 6 identity
- Wi-Fi generation
- Wi-Fi 6
- Bands and radios
- simultaneous 2.4GHz, 5GHz-low and 5GHz-high bands; 2x2, 2x2 and 4x4 radios respectively.
- Network role
- It can operate as the gateway or as a wired/wireless mesh node.
- Ethernet and wired interfaces
- Two auto-sensing 1GbE ports.
First time using a Scanual? Read the quick guide.
Information checked August 27, 2026. Confirm critical specifications with the manufacturer.
Official resources
Manuals and official support
Replacement parts and accessories
Products for eero K010001
Confirm your exact model number, the current product listing, included parts, and return terms before ordering.
Cables & connections
Ethernet Cable
Cmple Cat 6 Ethernet Patch Cable, 5 ft
The official K010001 resources document a standard RJ45 Ethernet port. This five-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Amazon Basics RJ45 Cat 6 Ethernet Patch Cable, 15 ft
The official K010001 resources identify an RJ45 Ethernet port. This 15-foot Cat6 patch cable has standard RJ45 connectors, so it can make a short indoor connection to a router or switch. Actual link rate is limited by both ports, the complete cable run, and the installation; this listing alone is not evidence of 5 or 10 Gb/s operation. Use separately rated Cat6A, permanent-run, outdoor, UV-resistant, direct-burial, or PoE cabling wherever the device or site requires it.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Jadaol Cat 6 Ethernet Patch Cable, 25 ft
The official K010001 resources document a standard RJ45 Ethernet port. This 25-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueModel details
Additional useful information
This guide identifies eero Pro 6 as model K010001 eero Pro 6; the input name 'eero 6' is corrected to eero's exact Pro 6 identity. It documents Wi-Fi 6, Two auto-sensing 1GbE ports. Use the linked manufacturer instructions for initial setup, recovery and model-specific compatibility before adding nodes, cabling or replacement power hardware.
This page covers eero Pro 6 exactly: model K010001 eero Pro 6; the input name 'eero 6' is corrected to eero's exact Pro 6 identity. Wi-Fi 6 simultaneous 2.4GHz, 5GHz-low and 5GHz-high bands; 2x2, 2x2 and 4x4 radios respectively. Two auto-sensing 1GbE ports. 100-240V AC external power supply; use the model-specific eero USB-C adapter.
Set up and administer the network with the eero mobile app; an eero account and supported mobile device are required for setup. connect a gateway unit to the modem or upstream Ethernet, then follow the eero app's Bluetooth/location-assisted setup and software update flow. It can operate as the gateway or as a wired/wireless mesh node. Supported eero generations can share a network, although older nodes and links can limit performance. In a mixed eero network, the least-capable placement or link can constrain features and performance even when the units are allowed to join the same network.
For loss of service, check the upstream modem, cable, app-reported LED state and power first, then restart the modem and eero in eero's documented order. A soft reset uses the reset button without deleting the network; the longer factory-reset sequence removes the unit and requires app setup again, so use eero's exact LED-timed procedure. Radio channels, services and adapter packaging vary by region. The cited eero support and compliance pages were live on the review date; feature availability, sale status and warranty terms remain region-specific. Match power and mounting accessories against this exact enclosure and model number. Do not substitute a visually similar eero adapter, PoE source or outdoor part unless eero's current documentation names the required electrical standard and model.
- Power: 100-240V AC external power supply; use the model-specific eero USB-C adapter.
- Management: the eero mobile app; an eero account and supported mobile device are required for setup
- Compatibility: Supported eero generations can share a network, although older nodes and links can limit performance.
- Setup: connect a gateway unit to the modem or upstream Ethernet, then follow the eero app's Bluetooth/location-assisted setup and software update flow.
- Reset and recovery: A soft reset uses the reset button without deleting the network; the longer factory-reset sequence removes the unit and requires app setup again, so use eero's exact LED-timed procedure.
- Region and lifecycle: Radio channels, services and adapter packaging vary by region.
See something wrong? Report an error
Report a broken official link, a seller-listed item that does not match, or another factual issue. Scanual reviews requests but does not provide urgent or manufacturer support.