Aqara Ceiling Light T1M
Exact model T1M
Also identified as: Aqara Ceiling Light T1M, CL-L02D, T1M RGBIC ceiling light
Aqara Ceiling Light T1M is a hardwired Zigbee ceiling fixture combining a tunable-white main lamp and addressable RGBIC ring, with region-specific mains ratings.
- Product family
- Ceiling Light T1M; hardware codes vary by market
- Form
- integrated ceiling fixture with no replaceable screw-in bulb base
- Main light
- tunable white from approximately 2700K to 6500K
- Decorative ring
- independently addressable RGBIC segments
- Published output
- up to about 3450 lumens for the main light
First time using a Scanual? Read the quick guide.
Information checked August 27, 2026. Confirm critical specifications with the manufacturer.
Official resources
Manuals and official support
Replacement parts and accessories
Products for Aqara T1M
Confirm your exact model number, the current product listing, included parts, and return terms before ordering.
No curated products are currently listed for this model.
Use the official resources above for support and check back as the product resource list is reviewed and updated.
Model details
Additional useful information
Use this Scanual guide to identify Aqara Ceiling Light T1M, follow official setup and reset guidance, and match power, radio, mounting, hub, and regional accessories to model T1M.
Aqara Ceiling Light T1M is a hardwired Zigbee ceiling fixture combining a tunable-white main lamp and addressable RGBIC ring, with region-specific mains ratings.
Setup: Verify the fixture's printed voltage and local wiring diagram, isolate the circuit, install the mounting plate and conductors to code, then add T1M to a supported Aqara hub.
Reset: Use only the power-cycle sequence printed in the regional T1M guide; repeated switching clears pairing and requires the fixture, zones, scenes, and ecosystem exposure to be added again.
Troubleshooting: If it will not light, test the branch circuit and wall control before hub pairing. If only app control fails, check the Aqara hub, Zigbee mesh, firmware, and whether the switch is cutting mains power.
Compatibility and ecosystem boundary: T1M is a complete hardwired luminaire, not a smart bulb. Its mains, neutral, earth, ceiling-box, and conductor requirements are regional and must be read from the exact unit and manual.
Maintenance and accessory matching: Do not recommend screw-base bulbs or generic lamp sockets. Replacement mounting and electrical parts need structural, conductor, voltage, country, and code compatibility; LEDs are integrated rather than routine user lamps.
Published checkpoints: Product family: Ceiling Light T1M; hardware codes vary by market. Form: integrated ceiling fixture with no replaceable screw-in bulb base. Main light: tunable white from approximately 2700K to 6500K. Decorative ring: independently addressable RGBIC segments. Published output: up to about 3450 lumens for the main light. Published power: approximately 40W main light plus 10W ring. Protocol: Zigbee. Hub requirement: compatible Aqara Zigbee hub. Mains: regional 100-240V or market-specific fixture label must govern installation. Installation: permanent ceiling wiring and protective-earth treatment follow local code. Setup/reset: wall-switch cycle or button sequence in the exact regional manual. Boundary: no E26, E27, GU10, or other user-replaceable bulb base.
- Published power: approximately 40W main light plus 10W ring
- Protocol: Zigbee
- Hub requirement: compatible Aqara Zigbee hub
- Mains: regional 100-240V or market-specific fixture label must govern installation
- Installation: permanent ceiling wiring and protective-earth treatment follow local code
- Setup/reset: wall-switch cycle or button sequence in the exact regional manual
- Boundary: no E26, E27, GU10, or other user-replaceable bulb base
See something wrong? Report an error
Report a broken official link, a seller-listed item that does not match, or another factual issue. Scanual reviews requests but does not provide urgent or manufacturer support.