TP-Link Deco X50
Exact model Deco X50
Also identified as: Deco X50, AX3000 Whole Home Mesh WiFi 6 System
Deco X50 is a dual-band AX3000 Wi-Fi 6 mesh unit with 160MHz 5GHz service and three auto-sensing gigabit Ethernet ports per indoor unit.
- Exact identity
- standard indoor Deco X50 AX3000 unit; not X50-PoE, X50-Outdoor or X50-5G
- Wi-Fi generation
- Wi-Fi 6, AX3000 class
- Bands and radios
- simultaneous 2.4GHz and 5GHz bands; 2x2 radios with published rates of 574Mbps and 2402Mbps and 160MHz 5GHz support where available.
- Network role
- Each unit can lead a Deco network in router mode or operate as an access point/satellite; any auto-sensing port may become WAN on the main unit.
- Ethernet and wired interfaces
- Three auto-sensing 1GbE WAN/LAN ports per standard indoor unit.
First time using a Scanual? Read the quick guide.
Information checked August 27, 2026. Confirm critical specifications with the manufacturer.
Official resources
Manuals and official support
Replacement parts and accessories
Products for TP-Link Deco X50
Confirm your exact model number, the current product listing, included parts, and return terms before ordering.
Cables & connections
Ethernet Cable
Cmple Cat 6 Ethernet Patch Cable, 5 ft
The official Deco X50 resources document a standard RJ45 Ethernet port. This five-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Amazon Basics RJ45 Cat 6 Ethernet Patch Cable, 15 ft
The official Deco X50 resources identify an RJ45 Ethernet port. This 15-foot Cat6 patch cable has standard RJ45 connectors, so it can make a short indoor connection to a router or switch. Actual link rate is limited by both ports, the complete cable run, and the installation; this listing alone is not evidence of 5 or 10 Gb/s operation. Use separately rated Cat6A, permanent-run, outdoor, UV-resistant, direct-burial, or PoE cabling wherever the device or site requires it.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Jadaol Cat 6 Ethernet Patch Cable, 25 ft
The official Deco X50 resources document a standard RJ45 Ethernet port. This 25-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueModel details
Additional useful information
This guide identifies TP-Link Deco X50 as standard indoor Deco X50 AX3000 unit; not X50-PoE, X50-Outdoor or X50-5G. It documents Wi-Fi 6, AX3000 class, Three auto-sensing 1GbE WAN/LAN ports per standard indoor unit. Use the linked manufacturer instructions for initial setup, recovery and model-specific compatibility before adding nodes, cabling or replacement power hardware.
This page covers TP-Link Deco X50 exactly: standard indoor Deco X50 AX3000 unit; not X50-PoE, X50-Outdoor or X50-5G. Wi-Fi 6, AX3000 class simultaneous 2.4GHz and 5GHz bands; 2x2 radios with published rates of 574Mbps and 2402Mbps and 160MHz 5GHz support where available. Three auto-sensing 1GbE WAN/LAN ports per standard indoor unit. Use the external adapter supplied for the standard indoor X50 hardware version; PoE support from suffix variants does not apply to this row.
Onboard and manage the system in the TP-Link Deco mobile app with a TP-Link ID. connect one unit to the modem or upstream gateway, wait for its setup LED state and complete the guided flow in the Deco app before adding satellites. Each unit can lead a Deco network in router mode or operate as an access point/satellite; any auto-sensing port may become WAN on the main unit. TP-Link states that Deco models can share one mesh; features depend on the main Deco, while radio, port and hardware-version limits remain model-specific. TP-Link permits mixed Deco networks, but it recommends using the most capable unit as the main Deco and placing nodes so that wireless or Ethernet backhaul matches the available hardware.
If a unit cannot join or drops offline, verify modem service, the selected main unit, WAN cabling and the app-reported LED state, then reboot before resetting; add a satellite in the app before wiring Ethernet backhaul. TP-Link's Deco reset guidance uses the app's Remove action or a one-second press of the powered unit's reset control; reset erases that unit's configuration. The X50 name has multiple suffix variants with different ports, power and enclosures. 160MHz and firmware availability depend on hardware version and country. The exact-model TP-Link download page is the authority for hardware-version and regional firmware; available revisions, radio channels and services vary by market. Hardware versions and regional firmware can differ under one retail name. Read the version and power label on the underside before choosing a replacement adapter or applying a download intended for another market.
- Power: Use the external adapter supplied for the standard indoor X50 hardware version; PoE support from suffix variants does not apply to this row.
- Management: the TP-Link Deco mobile app with a TP-Link ID
- Compatibility: TP-Link states that Deco models can share one mesh; features depend on the main Deco, while radio, port and hardware-version limits remain model-specific.
- Setup: connect one unit to the modem or upstream gateway, wait for its setup LED state and complete the guided flow in the Deco app before adding satellites.
- Reset and recovery: TP-Link's Deco reset guidance uses the app's Remove action or a one-second press of the powered unit's reset control; reset erases that unit's configuration.
- Region and lifecycle: The X50 name has multiple suffix variants with different ports, power and enclosures. 160MHz and firmware availability depend on hardware version and country.
See something wrong? Report an error
Report a broken official link, a seller-listed item that does not match, or another factual issue. Scanual reviews requests but does not provide urgent or manufacturer support.