TP-Link Deco BE65 Pro

Model details

Additional useful information

This guide identifies TP-Link Deco BE65 Pro as Deco BE65 Pro, marketed on the current U.S. page as Deco 7 Pro BE11000. It documents Wi-Fi 7, BE11000 class, Two auto-sensing 5GbE WAN/LAN ports, one auto-sensing 2.5GbE WAN/LAN port and one USB port per unit. Use the linked manufacturer instructions for initial setup, recovery and model-specific compatibility before adding nodes, cabling or replacement power hardware.

This page covers TP-Link Deco BE65 Pro exactly: Deco BE65 Pro, marketed on the current U.S. page as Deco 7 Pro BE11000. Wi-Fi 7, BE11000 class simultaneous 2.4GHz, 5GHz and 6GHz bands; 2x2 radios with published rates of 688Mbps, 4324Mbps and 5765Mbps plus 320MHz and Multi-Link Operation. Two auto-sensing 5GbE WAN/LAN ports, one auto-sensing 2.5GbE WAN/LAN port and one USB port per unit. One model-specific external adapter is supplied per unit; match the exact BE65 Pro hardware-version and electrical label before replacement.

Onboard and manage the system in the TP-Link Deco mobile app with a TP-Link ID. connect one unit to the modem or upstream gateway, wait for its setup LED state and complete the guided flow in the Deco app before adding satellites. Each unit can lead a Deco network in router mode or operate as an access point/satellite; any auto-sensing port may become WAN on the main unit. TP-Link states that Deco models can share one mesh; features depend on the main Deco, while radio, port and hardware-version limits remain model-specific. TP-Link permits mixed Deco networks, but it recommends using the most capable unit as the main Deco and placing nodes so that wireless or Ethernet backhaul matches the available hardware.

If a unit cannot join or drops offline, verify modem service, the selected main unit, WAN cabling and the app-reported LED state, then reboot before resetting; add a satellite in the app before wiring Ethernet backhaul. TP-Link's Deco reset guidance uses the app's Remove action or a one-second press of the powered unit's reset control; reset erases that unit's configuration. Do not shorten this identity to BE65: Pro port configuration matters. 6GHz, 320MHz and MLO depend on region, firmware and client support. The exact-model TP-Link download page is the authority for hardware-version and regional firmware; available revisions, radio channels and services vary by market. Hardware versions and regional firmware can differ under one retail name. Read the version and power label on the underside before choosing a replacement adapter or applying a download intended for another market.

• Power: One model-specific external adapter is supplied per unit; match the exact BE65 Pro hardware-version and electrical label before replacement.
• Management: the TP-Link Deco mobile app with a TP-Link ID
• Compatibility: TP-Link states that Deco models can share one mesh; features depend on the main Deco, while radio, port and hardware-version limits remain model-specific.
• Setup: connect one unit to the modem or upstream gateway, wait for its setup LED state and complete the guided flow in the Deco app before adding satellites.
• Reset and recovery: TP-Link's Deco reset guidance uses the app's Remove action or a one-second press of the powered unit's reset control; reset erases that unit's configuration.
• Region and lifecycle: Do not shorten this identity to BE65: Pro port configuration matters. 6GHz, 320MHz and MLO depend on region, firmware and client support.