TP-Link Deco BE63

Model details

Additional useful information

This guide identifies TP-Link Deco BE63 as Deco BE63, marketed on the current U.S. page as Deco 7 Pro BE10000. It documents Wi-Fi 7, BE10000 class, Four auto-sensing 2.5GbE WAN/LAN ports and one USB port per unit. Use the linked manufacturer instructions for initial setup, recovery and model-specific compatibility before adding nodes, cabling or replacement power hardware.

This page covers TP-Link Deco BE63 exactly: Deco BE63, marketed on the current U.S. page as Deco 7 Pro BE10000. Wi-Fi 7, BE10000 class simultaneous 2.4GHz, 5GHz and 6GHz bands; 2x2 radios on all three bands with published rates of 574Mbps, 4324Mbps and 5188Mbps plus 320MHz/MLO support. Four auto-sensing 2.5GbE WAN/LAN ports and one USB port per unit. One model-specific external adapter is supplied per unit; match the BE63 hardware-version and electrical label for any replacement.

Onboard and manage the system in the TP-Link Deco mobile app with a TP-Link ID. connect one unit to the modem or upstream gateway, wait for its setup LED state and complete the guided flow in the Deco app before adding satellites. Each unit can lead a Deco network in router mode or operate as an access point/satellite; any auto-sensing port may become WAN on the main unit. TP-Link states that Deco models can share one mesh; features depend on the main Deco, while radio, port and hardware-version limits remain model-specific. TP-Link permits mixed Deco networks, but it recommends using the most capable unit as the main Deco and placing nodes so that wireless or Ethernet backhaul matches the available hardware.

If a unit cannot join or drops offline, verify modem service, the selected main unit, WAN cabling and the app-reported LED state, then reboot before resetting; add a satellite in the app before wiring Ethernet backhaul. TP-Link's Deco reset guidance uses the app's Remove action or a one-second press of the powered unit's reset control; reset erases that unit's configuration. 6GHz, 320MHz, MLO and USB services depend on region, clients and firmware. The current marketing name does not change the printed BE63 model. The exact-model TP-Link download page is the authority for hardware-version and regional firmware; available revisions, radio channels and services vary by market. Hardware versions and regional firmware can differ under one retail name. Read the version and power label on the underside before choosing a replacement adapter or applying a download intended for another market.

• Power: One model-specific external adapter is supplied per unit; match the BE63 hardware-version and electrical label for any replacement.
• Management: the TP-Link Deco mobile app with a TP-Link ID
• Compatibility: TP-Link states that Deco models can share one mesh; features depend on the main Deco, while radio, port and hardware-version limits remain model-specific.
• Setup: connect one unit to the modem or upstream gateway, wait for its setup LED state and complete the guided flow in the Deco app before adding satellites.
• Reset and recovery: TP-Link's Deco reset guidance uses the app's Remove action or a one-second press of the powered unit's reset control; reset erases that unit's configuration.
• Region and lifecycle: 6GHz, 320MHz, MLO and USB services depend on region, clients and firmware. The current marketing name does not change the printed BE63 model.