NETGEAR Orbi Whole Home Tri-band Mesh WiFi 6 System RBK752
Exact model RBK752
Also identified as: RBK752, RBR750 + RBS750, Orbi AX4200 2-pack
RBK752 is a two-unit tri-band AX4200 Wi-Fi 6 kit with one RBR750 router and one RBS750 satellite.
- Exact identity
- RBK752 kit: one RBR750 router plus one RBS750 satellite
- Wi-Fi generation
- Wi-Fi 6, AX4200 class
- Bands and radios
- 2.4GHz and two 5GHz bands; 600Mbps, 1200Mbps and 2400Mbps class radios, with a dedicated 5GHz backhaul.
- Network role
- RBR750 is the router; RBS750 is the single satellite.
- Ethernet and wired interfaces
- RBR750: one 1GbE Internet and three 1GbE LAN ports; RBS750: two 1GbE LAN ports.
First time using a Scanual? Read the quick guide.
Information checked August 27, 2026. Confirm critical specifications with the manufacturer.
Official resources
Manuals and official support
Replacement parts and accessories
Products for NETGEAR RBK752
Confirm your exact model number, the current product listing, included parts, and return terms before ordering.
Cables & connections
Ethernet Cable
Cmple Cat 6 Ethernet Patch Cable, 5 ft
The official RBK752 resources document a standard RJ45 Ethernet port. This five-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Amazon Basics RJ45 Cat 6 Ethernet Patch Cable, 15 ft
The official RBK752 resources identify an RJ45 Ethernet port. This 15-foot Cat6 patch cable has standard RJ45 connectors, so it can make a short indoor connection to a router or switch. Actual link rate is limited by both ports, the complete cable run, and the installation; this listing alone is not evidence of 5 or 10 Gb/s operation. Use separately rated Cat6A, permanent-run, outdoor, UV-resistant, direct-burial, or PoE cabling wherever the device or site requires it.
Listing reviewed 2026-08-27
View on AmazonReport an issueEthernet Cable
Jadaol Cat 6 Ethernet Patch Cable, 25 ft
The official RBK752 resources document a standard RJ45 Ethernet port. This 25-foot Cat 6 patch cable uses RJ45 plugs and can connect the device to a router or switch. Actual link speed is limited by both ports and the full installation. Use separately rated permanent-run, in-wall, outdoor, direct-burial, shielded, or PoE cabling where required.
Listing reviewed 2026-08-27
View on AmazonReport an issueModel details
Additional useful information
This guide identifies NETGEAR Orbi Whole Home Tri-band Mesh WiFi 6 System RBK752 as RBK752 kit: one RBR750 router plus one RBS750 satellite. It documents Wi-Fi 6, AX4200 class, RBR750: one 1GbE Internet and three 1GbE LAN ports; RBS750: two 1GbE LAN ports. Use the linked manufacturer instructions for initial setup, recovery and model-specific compatibility before adding nodes, cabling or replacement power hardware.
This page covers NETGEAR Orbi Whole Home Tri-band Mesh WiFi 6 System RBK752 exactly: RBK752 kit: one RBR750 router plus one RBS750 satellite. Wi-Fi 6, AX4200 class 2.4GHz and two 5GHz bands; 600Mbps, 1200Mbps and 2400Mbps class radios, with a dedicated 5GHz backhaul. RBR750: one 1GbE Internet and three 1GbE LAN ports; RBS750: two 1GbE LAN ports. 12V DC, 2.5A for both RBR750 and RBS750.
Configure the system with the Orbi app and Orbi web interface. connect the kit's router component to the modem or upstream gateway and follow the Orbi or Nighthawk app flow for that family, then synchronize the included satellites. RBR750 is the router; RBS750 is the single satellite. Use the official Orbi compatibility matrix; RBS750-family expansion is distinct from newer 850/860/960/970 families. NETGEAR kit numbers encode a specific router and satellite count, so use the component identities here when adding a satellite or replacing a unit; a nearby RBK, MK or CBK number can describe different radios and ports.
If the Internet link or a satellite fails, check modem/SIM/coax service as applicable, WAN cabling, adapter labels and satellite sync LEDs, then restart components in topology order before resetting. Press the recessed reset control until the documented LED state appears; factory reset removes the component from the system and requires setup/synchronization again. Regional channel plans, services and product availability vary. NETGEAR's dedicated RBS750 page and kit data sheet establish two LAN ports on the satellite. NETGEAR's support page still provides downloads and documentation as of the review date; subscriptions, sale status and warranty vary by region. Update router and satellite firmware as a matched system before diagnosing backhaul. For replacement power or networking parts, confirm the label voltage/current and port speed on the exact component, not only the kit number.
- Power: 12V DC, 2.5A for both RBR750 and RBS750.
- Management: the Orbi app and Orbi web interface
- Compatibility: Use the official Orbi compatibility matrix; RBS750-family expansion is distinct from newer 850/860/960/970 families.
- Setup: connect the kit's router component to the modem or upstream gateway and follow the Orbi or Nighthawk app flow for that family, then synchronize the included satellites.
- Reset and recovery: Press the recessed reset control until the documented LED state appears; factory reset removes the component from the system and requires setup/synchronization again.
- Region and lifecycle: Regional channel plans, services and product availability vary. NETGEAR's dedicated RBS750 page and kit data sheet establish two LAN ports on the satellite.
See something wrong? Report an error
Report a broken official link, a seller-listed item that does not match, or another factual issue. Scanual reviews requests but does not provide urgent or manufacturer support.