eero Outdoor 7

Model details

Additional useful information

This guide identifies eero Outdoor 7 as eero Outdoor 7, official hardware model SN10001, an outdoor mesh access point rather than a standalone modem or unmanaged access point. It documents Wi-Fi 7, One 2.5GbE Ethernet port carrying data and PoE+ power. Use the linked manufacturer instructions for initial setup, recovery and model-specific compatibility before adding nodes, cabling or replacement power hardware.

This page covers eero Outdoor 7 exactly: eero Outdoor 7, official hardware model SN10001, an outdoor mesh access point rather than a standalone modem or unmanaged access point. Wi-Fi 7 simultaneous 2.4GHz and 5GHz bands; 2x2 radios on both bands. One 2.5GbE Ethernet port carrying data and PoE+ power. PoE+ (802.3at or better) through Ethernet, or eero's optional outdoor AC adapter; basic 802.3af is not sufficient.

Set up and administer the network with the eero mobile app; an eero account and supported mobile device are required for setup. connect a gateway unit to the modem or upstream Ethernet, then follow the eero app's Bluetooth/location-assisted setup and software update flow. It joins an eero network as an indoor/outdoor wired or wireless node; an eero gateway is required. It works with supported eero networks; placement and older nodes can constrain throughput. In a mixed eero network, the least-capable placement or link can constrain features and performance even when the units are allowed to join the same network.

For loss of service, check the upstream modem, cable, app-reported LED state and power first, then restart the modem and eero in eero's documented order. A soft reset uses the reset button without deleting the network; the longer factory-reset sequence removes the unit and requires app setup again, so use eero's exact LED-timed procedure. IP66 applies to the correctly installed unit; outdoor wiring and electrical-code requirements vary by location. The cited eero support and compliance pages were live on the review date; feature availability, sale status and warranty terms remain region-specific. Match power and mounting accessories against this exact enclosure and model number. Do not substitute a visually similar eero adapter, PoE source or outdoor part unless eero's current documentation names the required electrical standard and model.

• Power: PoE+ (802.3at or better) through Ethernet, or eero's optional outdoor AC adapter; basic 802.3af is not sufficient.
• Management: the eero mobile app; an eero account and supported mobile device are required for setup
• Compatibility: It works with supported eero networks; placement and older nodes can constrain throughput.
• Setup: connect a gateway unit to the modem or upstream Ethernet, then follow the eero app's Bluetooth/location-assisted setup and software update flow.
• Reset and recovery: A soft reset uses the reset button without deleting the network; the longer factory-reset sequence removes the unit and requires app setup again, so use eero's exact LED-timed procedure.
• Region and lifecycle: IP66 applies to the correctly installed unit; outdoor wiring and electrical-code requirements vary by location.