Midea Cube 50 Pint Dehumidifier with Built-in Pump

Model details

Additional useful information

Midea MAD50PS1QWT owners can use this exact-model guide to verify the published configuration, complete setup, choose operating modes, perform routine care, isolate common failures, and avoid applying parts or instructions from a nearby sibling.

Midea MAD50PS1QWT is the exact Cube 50 Pint Dehumidifier with Built-in Pump covered here. It is Midea's lift-and-twist Cube dehumidifier combines 50-pint removal, a large adjustable reservoir, an internal pump, and app or voice control.

Published configuration: Midea rates MAD50PS1QWT to remove 50 pints of moisture per day and markets it for spaces up to 4,500 square feet. The Cube cabinet operates extended for maximum reservoir capacity and nests into the bucket for compact storage. The built-in pump can discharge condensate upward through the model's pump-hose connection. App control and compatible voice-assistant control are supported for humidity monitoring and settings.

Setup, operation, and troubleshooting: Choose either the nested or extended Cube configuration before selecting a fill level. For unattended operation, distinguish the built-in pump hose from gravity drainage and secure the correct outlet. A P2 display is a water-level event, not a refrigeration failure. If the pump does not move water, verify hose connection, lift, blockage, and selected pump mode. Empty the reservoir before collapsing or rolling the unit and clean the air filter on the manual's schedule.

Maintenance and model boundaries: The manual provides Set, Max, and Continuous dehumidification modes with High and Low fan choices. Selectable fill levels are 2.25, 3.0, 3.75, and 4.25 gallons. A P2 code indicates that the selected water level has been reached and the bucket requires attention. The timer changes in half-hour increments through ten hours and one-hour increments from ten through 24 hours. Published nested dimensions are 14.45 by 14.76 by 14.57 inches and published weight is 41.54 pounds. Four casters and a carry handle support repositioning of the Cube when the reservoir is empty. Match replacement filters, tanks, drain hoses, window-kit pieces, remotes, and power components to Midea MAD50PS1QWT; nearby capacities and series names can use different dimensions, fittings, controls, or electrical requirements.

• Selectable fill levels are 2.25, 3.0, 3.75, and 4.25 gallons.
• A P2 code indicates that the selected water level has been reached and the bucket requires attention.
• The timer changes in half-hour increments through ten hours and one-hour increments from ten through 24 hours.
• Published nested dimensions are 14.45 by 14.76 by 14.57 inches and published weight is 41.54 pounds.
• Four casters and a carry handle support repositioning of the Cube when the reservoir is empty.